{"product_id":"nissan-370z-front-drift-angle-lock-kit-with-rack-relocation","title":"Nissan 370Z Front Drift Angle Lock Kit with Rack Relocation","description":"\u003cul\u003e\n\u003cli\u003e\n\u003cspan\u003e65 degrees of lock, parallel steering.\u003c\/span\u003e\u003cbr\u003eYou can tune your steering geometry either towards positive or negative Ackermann in just a few minutes even at trackside without messing up an alignment. \u003cbr\u003eAckermann adjustment kit included.\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eAdjustable lock stopper.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003eOne piece lower control arm desing.\u003c\/span\u003e \u003cbr\u003e2 lower links would have some benefits for circuit racing, but for drifting with higher steering angle the stiffness and packaging would become an issue. Therefore lower one piece arm is used.\u003cspan\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003eHigher roll center (RC).\u003c\/span\u003e\u003cbr\u003eOn Wisefab knuckle, both joints are dropped, which brings the front RC up on lowered car, providing higher roll stiffness and letting to remove the front anti roll bar (sway bar) that is quite difficult to package with that high lock angles.\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003eVery good camber control and minimal bump steer with high steering angles.\u003c\/span\u003e\u003cbr\u003eOn drift cars the dynamic camber and bump steer is much more important than static. With our kinematics we have assured that the camber would provide very good front grip and bump steer is minimal at all the range of steering.\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003eSteering jacking control.\u003cbr\u003e\u003c\/span\u003eDuring drifting, when steering angle is much bigger, jacking is also bigger, even with the same geometry and it could become a problem. We have changed the geometry that it doesn't cause any handling issues.\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003eConsistent and predictable self-alignment torque.\u003c\/span\u003e \u003cbr\u003eCaster is not the only important parameter to provide sufficient self-alignment torque especially at high lock. It's the combination of different parameters to maintain consistent trail and self-alignment torque. With our setup the steering wheel turns always to the direction of movement and doesn't get stuck at full lock.\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003eAdjustable spring and shock absorber motion ratio.\u003c\/span\u003e\u003cbr\u003eThe shock lower bracket has 3 attachment possibilities, which allows to change suspension stiffness and handling very quickly.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eKit includes:\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePre-set upper and lower control arms.\u003c\/li\u003e\n\u003cli\u003eKnuckles with hardware.\u003c\/li\u003e\n\u003cli\u003eAssembeled tie rods.\u003c\/li\u003e\n\u003cli\u003eInstallation guide \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eOther components, packaging and clearance.\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThis kit assumes car to have coilovers to have enough clearance.\u003c\/li\u003e\n\u003cli\u003eRide height is designed to be ~80mm from front subframe to ground.\u003c\/li\u003e\n\u003cli\u003eDependent on rim width and ET, wider fenders or fender flares would be needed. Inner wheel wells do not need to be modified with tire diameter up to 635mm (215\/45R17, 225\/45R17, 235\/40R17, 225\/40R18 etc).\u003c\/li\u003e\n\u003cli\u003eMinimum rim diameter is 17\".\u003c\/li\u003e\n\u003cli\u003eRecommended backspacing is ~135mm (7\" ET45; 8\" ET35; 9\" ET20). If ET is smaller, then wheels stay more outwards, if ET is bigger, then spacers need to be used.\u003c\/li\u003e\n\u003cli\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cem\u003e\u003cstrong\u003eThe kit is designed and manufactured the way that after installation and toe adjustment it's ready to use right away.\u003c\/strong\u003e\u003c\/em\u003e\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eToe in\/out: If Ackermann is 0 or negative then toe is 2mm out. If Ackermann is positive then toe is 0\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eCamber: -3,7 +\/-0,3\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eCaster: 6,3 +\/-0,3\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Fuzera High Rev Garage","offers":[{"title":"Default Title","offer_id":47526315098332,"sku":null,"price":3569.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0780\/7035\/0044\/files\/WF370-1.jpg?v=1769185119","url":"https:\/\/fuzerahighrevgarage.com\/products\/nissan-370z-front-drift-angle-lock-kit-with-rack-relocation","provider":"Fuzera High Rev Garage","version":"1.0","type":"link"}